Patios, driveways and pool decks sealed under a double UV-stable topcoat — slip-resistant, sun-proof and hosed clean in minutes.
Bare exterior concrete in Los Angeles has a hard life: UV beating down most of the year, sprinkler overspray, pool chemicals, oil drips and 300-degree tire contact on the driveway. It stains, dusts, cracks and looks tired within a few seasons. An outdoor coating seals all of that behind a double UV-stable polyaspartic topcoat — the exterior-grade build we put on every patio, driveway and pool deck.
Preparation is the same standard as our indoor floors: diamond grinding to open a true bonding profile, crack and spall repairs ground flush, then the coating system matched to how the surface is used — decorative flake for patios, high-build traffic systems for driveways, and textured quartz broadcast where bare feet need grip around water.
Decorative flake or solid finishes that turn a dusty slab into an outdoor room — sealed against planters, BBQ grease and sun.
High-build systems rated for daily parking and hot-tire pickup, with repairs ground flush so the apron reads clean from the street.
Cool-underfoot, slip-resistant textures that take chlorine, salt systems and barefoot traffic without chalking.
Patios, driveways and pool decks all share one installed range: $8–$12 per square foot — $3,200–$4,800 for areas up to 400 sq ft. Outdoor work starts higher than a garage floor because every exterior system carries a double topcoat. Every project starts at $2,600, and the final number comes from a free on-site measure.
Larger areas, decorative borders or heavy repairs move the number — the LA pricing guide breaks down every factor.
Patios, driveways and pool decks run $8 to $12 per square foot installed — $3,200 to $4,800 for areas up to 400 sq ft. Outdoor work starts higher than garage work because every exterior system gets a double topcoat. The exact number comes from a free on-site measure.
No. Exterior surfaces get a double UV-stable polyaspartic topcoat — the chemistry specifically engineered not to yellow or chalk under sun exposure. That is also why we can put a three-year warranty on outdoor installations.
Not the way we build it. Pool decks and wet areas get a slip-resistant texture broadcast into the coating — quartz or fine aggregate — so the finished surface grips bare feet even when soaked. You choose how aggressive the texture feels.
Yes. Driveways are diamond-ground and built with a high-build system rated for vehicle traffic, including hot tires. Repairs to cracks and spalls happen during preparation, so the finished driveway is flat, sealed and ready for daily parking.
Most patios, driveways and pool decks take one to two days depending on size, repairs and the texture system. You can usually walk on the surface the next morning and return it to full use within two to three days.
Free on-site estimate anywhere in Los Angeles — we measure, check the slab, and hand you one installed number.