Your garage floor coated in one day — by the only crew in LA that manufactures, supplies and installs its own coatings. Factory-direct pricing, a floor that never peels, and a warranty one company stands behind.
Most installers buy their coatings at retail and pass the markup to you. We manufacture our own VOC-free epoxy and polyaspartic systems and stock them in our own warehouse — so your floor is priced supplier-direct, and the people who made the material are the same crew troweling it onto your slab.
That one fact changes everything downstream: no corners cut on chemistry, a limited lifetime residential warranty backed by a single company, and one-day flake installs that still get a moisture-barrier epoxy basecoat and a UV-stable polyaspartic topcoat. We coat garage floors, interiors, patios, driveways and pool decks, and commercial and industrial space across LA — in flake, metallic, solid color, quartz and grind & seal.
The core of what we do: flake, metallic or solid systems over diamond-ground concrete, most of them parked on within three days.
Garage epoxy →
Outdoor concrete coatings with a double topcoat built for sun and sprinklers — slip-resistant textures for pool decks included.
Outdoor coatings →
Showrooms, restaurants, gyms and retail — installed nights and weekends so the business never closes.
Commercial →
High-build systems rated for forklifts, pallet jacks and chemical exposure, with line striping on request.
Industrial →
Hand-poured metallic pigments — no two floors alike. The showroom look, in homes and businesses.
Metallic →
Uniform, easy-clean finishes for garages and workspaces — or sealed natural concrete when you want the slab to show.
Solid color →Most installers buy coatings at retail and pass the markup to you. We stock our own VOC-free epoxy and polyaspartic systems, so your quote reflects distributor-level pricing on the exact materials going onto your slab — and nobody can blame a supplier if something goes wrong, because there isn't one. One company, one standard, one warranty.
It also means no shortcuts on chemistry. Every residential floor gets a moisture-barrier epoxy basecoat and a UV-stable polyaspartic topcoat — the pairing that stops vapor from lifting the floor from below and sun from yellowing it from above. See the finishes on our color chart or browse recent installations.
This is our flake system process — the install most Los Angeles garages get. Metallic (3–4 days), quartz (1–2) and solid color (2–3) follow their own schedules with the same preparation standard.
The slab is ground to open a true bonding profile. Never acid etching.
Industrial vacuums pull every trace of dust so the coating meets bare, clean concrete.
Cracks and divots are filled with rigid filler and ground flush.
Stem walls and steps are coated so the finish wraps the space cleanly.
A moisture-barrier epoxy basecoat keys into the ground surface.
Flake is thrown to full rejection — the floor takes flake until it cannot hold more.
Loose flake is scraped and vacuumed off once cured, leaving an even texture.
A UV-stable polyaspartic topcoat seals the system against sun, tires and spills.
Most two-car flake garages in Los Angeles run $2,600–$4,000 installed, in one day. Every project starts at $2,600, and the final number always comes from a free on-site measure — but these are the real ranges we install at:
| System | Per sq ft | 2-car garage (to 400 sq ft) |
|---|---|---|
| Flake garage floor | $6.50–$10 | $2,600–$4,000 |
| Solid color epoxy | $9.50–$11.50 | $3,800–$4,600 |
| Metallic epoxy | $12.50–$18.50 | $5,000–$7,400 |
| Quartz system | $9–$16.50 | $3,600–$6,600 |
| Grind & seal | $6.50–$9 | $2,600–$3,600 |
| Patio / driveway / pool deck | $8–$12 | $3,200–$4,800 |
| Commercial / industrial | $6–$16 | Quoted per job |
Ranges are installed prices — preparation, repairs, materials and labor included. Read the full breakdown in our Los Angeles epoxy flooring guide, or skip the math: book the free estimate.
Most two-car flake garage floors in Los Angeles run $2,600 to $4,000 installed — roughly $6.50 to $10 per square foot. Solid color systems run $3,800 to $4,600, metallic $5,000 to $7,400, and quartz $3,600 to $6,600 for the same size. Every project starts at $2,600, and the exact number comes from a free on-site measure.
Yes — the flake system is a one-day install. We diamond-grind in the morning, repair cracks, apply a moisture-barrier epoxy basecoat, broadcast flake to full rejection, then seal it with a UV-stable polyaspartic topcoat by evening. You can walk on it that night and park on it in 48 to 72 hours. Metallic takes 3–4 days, quartz 1–2, and solid color 2–3.
Peeling and hot-tire pickup almost always trace back to poor surface preparation. We diamond-grind every slab to open a true bonding profile — never acid etching — so the basecoat keys into the concrete instead of sitting on top of it. That preparation is why we can back residential floors with a limited lifetime warranty.
They do different jobs in the same floor. Epoxy is the bonding and build layer — our moisture-barrier epoxy basecoat grips the ground concrete and blocks vapor. Polyaspartic is the finish layer — a UV-stable polyaspartic topcoat that will not yellow in Los Angeles sun and resists hot-tire pickup, chemicals and abrasion. A quality floor uses both.
Yes. We are based at 840 Santee St in Downtown Los Angeles and install across the whole city — from the San Fernando Valley to the Westside, Hollywood, South Bay and East LA — plus Orange, Ventura, San Bernardino, Riverside and San Diego counties.
Yes. Our materials are VOC-free, so there are no solvent fumes filling the house during installation. That also means no days of airing out the garage — most customers are back to normal use on the published cure schedule.
Residential floors carry a limited lifetime warranty. Commercial and outdoor installations carry a three-year warranty. Because we manufacture the coatings we install, the warranty is backed by one company — there is no installer blaming the material supplier.
Yes — repairs are a standard step of every installation. Cracks, spalls and divots are cut open, filled with rigid filler and ground flush during preparation, so the finished floor is flat and the damage does not telegraph through the coating.
Flake is the most popular garage finish by far — it hides dust and tire marks, adds slip resistance, and installs in one day. Metallic epoxy leads for interiors and showrooms where owners want a marbleized, one-of-a-kind look, and solid color is the standard for commercial and industrial space.
Yes. We measure the slab on site, check for moisture and damage, and hand you one installed number — no obligation. Call (888) 999-4319 or send the contact form and we will schedule it.
Our shop sits in the Fashion District (ZIP 90014), minutes from the 10 and the 110 — which puts every LA neighborhood within a short drive for our crews:
Central & East: Downtown LA, Arts District, Echo Park, Silver Lake, Los Feliz, Boyle Heights, Highland Park, Eagle Rock, Glassell Park
San Fernando Valley: Sherman Oaks, Studio City, North Hollywood, Van Nuys, Encino, Tarzana, Woodland Hills, Northridge, Granada Hills, Burbank, Glendale
Westside & South Bay: Santa Monica, Venice, Mar Vista, Culver City, West LA, Brentwood, Pacific Palisades, Playa del Rey, El Segundo, Torrance, San Pedro
Hollywood & Mid-City: Hollywood, West Hollywood, Hancock Park, Mid-Wilshire, Koreatown, Beverly Grove
Working on a permit-sensitive project? The LA Department of Building and Safety covers when garage alterations need review; floor coatings themselves are finish work. We also install across Orange, Ventura, San Bernardino, Riverside and San Diego counties — ask when you book through city or county.
Tell us about your slab and get one real installed number — measured on site, no obligation. We manufacture, supply and install our own VOC-free coatings, and residential floors carry a limited lifetime warranty.
